Custom Search



Anaerobic Digester

We have covered on the website twice before (June 2004 and Feb 2006) about our trials and plans to expand the water treatment to include Anaerobic digestion alongside our existing Aerobic treatment.

A good web resource on the treatment can be found at Wikipedia.

As detailed previously we are now running phase 2 of this project and in October 2006 the plant will be running 24/7 with full production of Biogas expected in November 2006. The plant is authorised under our IPPC Authorisation issued this year.

We are producing Biogas which in turn contains methane which untreated is a potent greenhouse gas. We have installed a flare that treats the methane as follows:

Burning one molecule of methane in the presence of oxygen releases one molecule of CO2 (carbon dioxide) and two molecules of H2O (water):

CH4 + 2O2 CO2 + 2H2O

Once we have quantified the amount and quality of gas then we will use the energy in engines or boilers to replace Natural Gas.

At present we are producing around 2 m3 per hour of Biogas and this should increase to over 30 m3 per hour by November 2006. To use a simple analogy the daily production of methane at 30m3 per hour is the equivalent volume of methane that a herd of 1200 cows would produce approximately a day.

The new plant is computer controlled and we plan in late 2006 to have a live web application that can show gas production figures via our website. This is already available to operators on site.

Below are 2 screenshots from the plant

Main Control Screen

AD Plant Schema

Flare Control

AD Plant Schema

Gasification

Gasification is a process in which the transformation of any carbon based material into gaseous fuels is possible without combustion. Instead, a chemical reaction is created by combining waste with oxygen and steam under high pressure, generally at temperatures in excess of 800°C. Gasification is "the continuation of the pyrolysis process, where the residual carbon is oxidized from the glowing embers of the pyrolysis coke” (Bilitewski et al., 1997). The process parts everything in molecules and produces syngas, which contains carbon monoxide, hydrogen and methane. The gas has a net calorific value of 4-10 MJ/Nm3 (Zafar, 2009) and can thus be used to generate electricity. A typical gasification plant diagram can be seen in Figure 1.

Modern Gasification Plant Scheme
Schematic of a MSW Gasification and Power Generation Plant (Energos, 2009)

The gasification and power generation plant is composed of basically four modules: a waste pre-processing unit, the gasification/oxidation chambers, the energy recovery section and finally the flue gas cleaning module. In the pre-processing module the waste is sorted, grinded, shredded, stored and dried with the purpose of obtaining a gasification-friendly feed material, free of metals, glass and plastic bottles.

The second module consists of two chambers. Gasification of the solid waste takes place in the primary chamber, at below the stoichiometric air requirement and at temperatures between 400 and 1000°C the carbon reacts with oxygen and water steam to form syngas, i.e. carbon monoxide, carbon dioxide and hydrogen (Equations 1, 2, 3, 4, 5). The ratio of CO/CO2 occurring in the gasifier is determined by the Boudouard reaction, at temperatures lower than 700°C the predominant product will be carbon dioxide, while at higher temperatures the predominant product will be carbon monoxide. In the high temperature oxidation unit, i.e. the secondary chamber, a staged oxidation of the syngas is facilitated by multiple injections of air and recycled flue-gas (Bilitewski et al., 1997; Energos, 2009; BREDL, 2009). At the end of the gasification grate, the bottom ash is discharged.

Equation 1: C + ½O2 → CO

Equation 2: C + O2 → CO2

Equation 3: C + 2H2O → CO2 + 2H2

Equation 4: C + H2O → CO + H2

Equation 5: C + CO2 → 2CO

The last two modules work under the same principle that a waste incineration plant does. First the generated heat in the secondary chamber is utilized in a boiler to heat up the water pipes and convert water into steam to move a turbine and generate electricity. Finally, the remaining flue gases are cleaned using the dry sorption system. Lime is injected on the flue gas stream to adsorb the acid components, while the activated carbon adsorbs the dioxins, heavy metals and total organic carbon (Energos, 2009).

Satan eats Seitan

Petro China’s Gas Reserve Tops World

Oil Companys gas reserve Petro Chinas Gas Reserve Tops World (中石油天然气储备世界第一)Petro China has the largest reserve of Natural Gas among world’s main energy companies. According to the latest estimate, Petro China has a total reserve of natural gas for about 33 years, followed closely by Woodside (30 years). Other big companies that have high reserve of natural gas include Exxon Mobil, Occidental and Oil Search. Petro China is one of the biggest listed companies in China and in the world.

Uranium Extraction: From Mining to Enrichment

process-1.bmp

(Source: http://web.ead.anl.gov/uranium/guide/index.cfm, Depleted UF6 Management Information Network)

The basic steps involved in the process of uranium mining to the production of nuclear reactor fuel are shown in the diagram. Uranium ore is mined, and then transported to a milling facility where it is refined to uranium oxide. The oxide (yellowcake) is then converted to uranium hexafluoride to undergo enrichment. The enriched product can then be processed to reactor fuel for electricity generation via nuclear reactors.

process-2.bmp

The Big Eagle open pit mines on the south slope of Green Mountain near Jeffrey City, Wyoming. (Picture courtesy of: www.usnrg.com, U.S. Energy Corporation)


THE STAGES IN MINING AND MILLING

1) EXPLORATION Before mining can actually take place, the uranium ores are located by radiological studies. With the highest-grade deposits buried in deep rock formations, advanced technologies like satellite imagery, geophysical surveys, multi-element geochemical analysis and computer processing are used to search for the deposits. The potential deposits are drilled, and samples are extracted for studies by geologists. It is a long procedure that involves detailed geological and economic evaluation of the grade and characteristics of the orebody. Mining engineers must then develop a mining plan to extract the ore. If the project has potential, environmental impact assessments and the public consultation process begin in order to file applications for regulatory approvals of the project. It is only after permits and licences are in place, that mine activities can begin. It can take decades before a discovery of an orebody can lead to electricity production. For example, Cameco’s McArthur River mine took 12 years to result in commercial production.

2) EXTRACTION Uranium-containing ore is retrieved. Uranium occurs in a variety of ores, and is traditionally mined from open pit or underground mines by drilling and blasting techniques. If the uranium ore is found near the surface, (less than 100 metres deep), the open pit mining method can be used. This method removes the surface soil and rock, and the pit is excavated to access the ore. If the ore is located further below the surface, underground mining methods are more economical. To access the ore, vertical shafts are dug and then tunnels called drifts, are cut directly to the deposit.

The uranium content of the ore is extremely low (usually less than 0.3%), so large amounts of the ore have to be mined. For example, Olympic Dam has an ore grade of 0.05%, which means that for every tonne mined, only 5kg of uranium is retrieved. Thus, large amounts of waste rock are produced during this process. In some cases the ore may be extracted by in situ leaching. This process extracts the uranium from underground by dissolving the uranium from the ore, and then pumping uranium-bearing solution to the surface.

u_ore.jpg

Did you know that uranium is one of the most abundant elements in the earth’s crust? (Picture courtesy of:www.cameco.com, Cameco Corporation)

camecopit.jpg

Cameco’s Key Lake Open Pit Mine in 1994 (Picture courtesty of: www.cameco.com, Cameco Corporation)

3) CRUSHING The ore is usually processed at milling facilities close to the mine site in order to minimize transportation costs, as well as to prevent release of the products into the environment. The ore must be crushed and grinded into smaller fragments. After initial crushing, the ore is passed through a mill which grinds the rock further into a fine powder. It is this process that creates the fine particles that can readily be emitted into the environment. The small size of the rock increases the radioactive surface area, and also makes it difficult to completely isolate from the surroundings.

4) CHEMICAL LEACHING In this process, large amounts of water, sulphuric acid and thickener are added to the ore powder.

The UO2 is oxidised to UO3:

UO3 + 2H+ ====> UO22+ + H2O UO22+ + 3SO42- ====> UO2(SO4)34-

The uranium is able to bond with the acid, and as a result about 90% of the uranium can be separated from the host rock.Sulfuric acid leaching is the most common method, but some mills require alkaline leaching when the ore has basic components which can react heavily with acid.

5) PRECIPITATION and DRYING The uranium solution is purified by ion exchange systems and solvent extration technologies. When the uranium precipitate is extracted from solution, filtered and dried, the product is a yellow uranium oxide (U3O8), called “yellowcake”. Yellowcake contains between 60% and 90% uranium by weight.

6) STORAGE and SHIPPING The yellowcake is then transported to enrichement facilities to be processed to reactor fuel.

Uranium Oxide (Yellow Cake)

yellow%20cake1.bmp

cake-2.bmp


Oil-shale extraction technology

As a long-term petroleum source, oil-shale reserves are vast but remain elusive. Oil-services giant Schlumberger is aiming to change that with the recent purchase of a radio-frequency (RF)/critical-fluid (CF) extraction technology that unlocks this vast resource and brings it to the surface in a cost-effective and environmentally sound manner.

Oil shale is a type of sedimentary rock that contains solid bituminous material, known as kerogen, that releases oil or gas when heated. While oil-shale deposits are found in many places around the world, the largest deposits by far reside in the Rocky Mountain region of the U.S. Oil-shale reserves are estimated at nearly 2 trillion bbl in the states of Colorado, Utah and Wyoming alone, according to the U.S. Department of Energy. This quantity would be sufficient to meet U.S. demand at current levels for the next 250 years.

However, successfully harvesting this vast resource has been technically, economically, and environmentally challenging. The most common methods of recovering oil shale include a mining step, in which the shale is mined from the surface or underground and then transported to a facility for further processing. The waxy, solid nature of the shale necessitates a heating process, known as retorting, to release the trapped oil and allow it to flow out of the rock matrix.

The large environmental and processing costs associated with this method of oil-shale extraction have prevented it from becoming a major petroleum source. According to an Environmental Impact Statement (EIS) prepared by the U.S. Department of the Interior's Bureau of Land Management, the environmental impacts include emission of greenhouse gases during mining and processing, disturbance of mined lands, need for disposal of the spent shale, use of water resources, and impacts on air and water quality. These factors contribute to the relatively high cost of producing oil from shale, which the EIS estimates at greater than USD60/bbl.

raytheon-rf-cf-web.jpgThe RF/CF extraction technology developed by Raytheon and technology partner CF Technologies aims to lower these environmental and processing impacts dramatically by employing an in-situ retorting process. In this process, wells are drilled into the shale strata using standard drilling equipment. Raytheon's RF transmitters (which have been used extensively for radar and guidance systems) are then lowered into the well. The transmitters emit a radio signal at a frequency that uniformly heats the shale and liquefies the trapped petroleum.

Supercritical carbon dioxide is then pumped into the heated shale formation to extract the oil from the rock and carry it to a producing well. At the surface, the carbon dioxide is separated from the oil, reprocessed, and pumped back into the injection wells. The recovered oil is sent for further processing and refining.



Raytheon estimates that this combination of RF technology to heat the shale followed by a critical-fluid flush to bring the oil to the surface will result in significant environmental benefits and cost savings over other shale-extraction methods. The technology can retrieve 4 to 5 bbl of oil for every barrel consumed during the extraction process, while other in-situ retorting processes reportedly extract only 1.5 to 3 bbl for every barrel consumed.

In addition, the RF/CF technology enables extraction to start 1 to 2 months after the transmitters are activated. Other in-situ methods using in-ground electrical heating systems may take 2 to 3 years to heat the shale sufficiently for oil to flow.

The sale to Schlumberger promises to open up new application areas for this technology and is part of a Raytheon initiative to expand its RF and communication-systems technologies to a customer base outside of the security and defense arenas. Four years ago, Raytheon created the Mission Innovation group within its Integrated Defense Systems (IDS) division, which had a goal of focusing mature defense capabilities to address challenges in energy exploration and the environment.

"Schlumberger is the world leader in bringing new technology to the field for the exploration and production of oil," said Lee Silvestre, vice president of the Mission Innovation group of Raytheon IDS. "Its acquisition of this technology is an important milestone in Raytheon's approach to applying proven technology that can unlock potential in adjacent markets."

To learn more about this oil-extraction technology, contact Raytheon.


The Global Pursuit for Nuclear Fuel

Brazil plans expansion to uranium enrichment

Brazil nuclearBrazil plans to invest $1.8 billion to expand its capability to enrich uranium for commercial nuclear reactors. A conservative estimates is this level of investment could add at least 1-1.5 million SWU/year to its production rate.

Brazilian Energy minister Edisao Labao told local news media the country has 1.1 million tons of uranium to draw on to supply the plant. He said the objective of the new uranium enrichment facilities is to make Brazil self sufficient in its supply of nuclear fuel.

Brazil has manufacting capabilities to take the enriched uranium, as UF6, covnert its to solid powder, and complete production of fuel pellets and assemblies for commercial nuclear reactors. The intial conversion of Yellowcake to UF6 is carried out for Brazil by Areva in France.

Brazil is completing its third reactor, Angra 3, which is expected to enter revenue service in 2015. The government plans to build another four reactors in the next 20 years,

Brazilian nuclear trade press also reported that Brazil plans to export some of its enriched uranium to China and South Korea. Brazilian officials are especially interested in China's market given its ambitious plans to build at least 40 GWe of new nuclear energy power stations in the next 10 years,

UK Proposes using plutonium stocks for MOX fuel

mox fuel(NucNet) The UK government has proposed using the country’s civilian separated plutonium stocks in mixed-oxide (MOX) fuel for nuclear reactors.

As part of a consultation that was launched on 7 February 2011 the government proposed long-term management options for the country’s civil plutonium stocks.

The three options are:

  1. to reuse it in MOX fuel;
  2. to immobilize it and dispose of it as waste; and
  3. continued long term storage.

The government said its “preliminary view” is that the best option is to reuse the plutonium in MOX fuel.

It said MOX fuel fabrication is a proven and available technology that offers greater certainty of success, while allowing use of the inherent energy resource of the plutonium.

The UK is storing about 112 tonnes of civil separated plutonium. This amount includes about 28 tonnes of material belonging to overseas customers.

In the 1950s plutonium separation was carried out in the UK for defense purposes. In the 1960s when it was thought that fossil fuels would run out, this plutonium was made available as fuel for fast reactors.

Eventually, in 1994, the UK abandoned almost all research into fast reactors because it decided they would not be commercially viable in the foreseeable future.

South Korea pursues spent fuel reprocessing

A contentious negotiation with the U.S. is easing as South Korea agreed to a 10-year joint study to develop spent fuel reprocessing capabilities. It would modify a 1974 accord South Korea signed with the U.S. to not develop this technology.

Since then South Korea has developed a growing fleet of successful nuclear power plants and also entered the global market as an exporter of its designs.

In the latest round of talks, South Korea is said to be proposing development of pyro- processing methods for recycling its spent fuel. The extracted uranium and plutonium would be fabricated into MOX fuel.

(Update 02/11/11: While there is nothing in the news from South Korea about fast reactors, it would seem more likely the output of pyroprocessing would be to produce a new uranium oxide fuel for this type of reactor rather than MOX for an LWR.)

The method does not produce a pure stream of plutonium which makes it attractive in terms of nonproliferation objectives. The Korea Atomic Energy Institute is providing the technical development of the method.

The U.S. contribution will likely come from Argonne National Laboratory which has done R&D work on a pyro-processing technology. (image below via ANL)

ANLpyroprocessing

High Oil Prices Make Renewable Energy Viable - But Also Grows The Oil Supply

People talk a lot about alternative fuels being more viable with oil at such high prices. It also, however, makes other, more exotic, fossil fuel extraction techniques viable. This piece in the UK’s Independent outlines how oil reserves are understated because certain known fields are too expensive to extract at this time - and therefore are excluded from oil reserve projections (an important point that I would wager that many investors don’t understand).

The risk for green investors (and the environment for that matter) is that, if true, tapping oil reserves such as these could grow oil supply over current projections (even if its at these current high prices) - driving out the peak oil scenario longer than anticipated by Wall Street. (This is the kind of stuff investors and analysts miss all the time).

Cool Chart from Oil and Gas Journal Too…

Product Innovation


Historically, vertical flight has required a compromise between hover performance and forward speed. If you look at efficiency vs. speed image on the right; the desired helicopter attributes (good hover efficiency, low speed controllability, low downwash, hover endurance) fall to the left of the plot. High disk loading aircraft such as Harriers and JSF, fall on the right of the plot: while fast, their hovering capabilities are limited, and their operational costs tend to increase due to the required power loading. Sikorsky is focused on creating an aircraft that operates to the right on this scale: providing more speed without compromising the essential attributes that make helicopters valuable.

The Sikorsky X2 TECHNOLOGY™ demonstrator aircraft will incorporate several new technologies and demonstrate them in a flight environment. These technologies include an integrated Fly-by-Wire system that allows the engine/rotor/propulsor system to operate efficiently, with full control of rotor rpm throughout the flight envelope, high lift-to-drag rigid blades, low drag hub fairings, and Active Vibration Control. In addition, the aircraft will be used as a 'flying wind tunnel' to determine the main rotor to propulsor aerodynamic interaction, shaft angle optimization for performance, and blade tip clearance for a range of maneuvers. This will allow optimization of the X2 TECHNOLOGY™ suite for future products.


Sikorsky is well on its way in completing the design of the X2 TECHNOLOGY™ Demonstrator with important milestones right on the horizon.

Shuanghuan Sceo: Chinese BMW X5 Copy-Cat Coming To Europe!

They just won’t let it go, will they? What if every Chinese car tested by Germany’s ADAC has miserably failed at the crash tests; who cares! Just keep bringing them in and at some point we’ll accept them. Following the Landwind SUV and the Brilliance BS6 Sedan, next up from China is the Shuanghuan Sceo SUV that will be distributed by a new French car dealer named “AZ Motors”. The latter announced that it has been appointed as distributor of the Chinese 4x4 in France, Belgium and the Netherlands.

However, with the Sceo, safety isn’t the only thing Europeans should be worried about as you don’t need the imagination of J.K. Rowling to see that Shuanghuan’s SUV is inspired from the previous generation BMW X5 with a touch of Toyota Land Cruiser up front. We might find it hilarious, but we’re sure as hell that BMW execs

Companies refining and distributing petroleum products

To assist the modeller in providing a consistent and (more or less) prototypical appearance to their tanker fleets it is necessary to have some understanding of the oil industry itself. This can further be broken down into firms providing specialist services and the general oil companies. It should be noted that there was some inter-refinery traffic, one company might buy some product from another to create a required mix or to cover whilst plant maintenance was carried out. Hence just because you have modelled an Esso refinery you might also see other oil company tank wagons visiting the site. In the main however a refinery deals primarily with the traffic of the owning company. Customers would be more likely to obtain supplies from a distribution depot than direct from the refinery, although this did (and presumably still does)happen.

Oil Companies

For more on oil company branding see also Appendix One - Garages and Petrol Stations.
For details on Lubrication and other specialist oil suppliers see Lineside Industries - Lubricating Oils and Associated Works.

It is impractical to cover the details of all companies manufacturing or trading in oil products, a good start for anyone interested in these areas is Mr. R. Tourret's book 'Petroleum tank wagons of Britain' (see bibliography for details). There are rather a lot of companies called Standard Oil ofsomewhere, these were formed when the American giant Standard Oil Co was broken up in 1911 (after it was found to be a monopoly and was accused of price fixing and various other nefarious activities). The result was over thirty smaller companies, many of whom retained the word Standard in their title. There were a lot of British companies with 'oil' in their name, but many of these were vegetable or fish oil related industries. Examples include the Erith Oil Works who initially dealt in fish oils, later seed oils and the Kosmo-Lubric Oil Co of Stalybridge, Cheshire who were listed as oil importers and refiners in 1914, with a range of lubricants on offer, but on further investigation turned out to be dealing in vegetable oils. Seed crushing and its associated oil is discussed in 'Lineside Industries - Industries associated with docks'.

Where I was not able to trace a refinery operated by the company I have indicated this in the text, however although some firms bought their fuel from the oil companies others operated their own tank farms and imported the refined product (early examples being Power Petroleum and Russian Oil Products). Also companies sometimes went in and back out of the refinery business. Most of the firms listed below have at some point operated tank wagons several of which have been seen in model form.

In 1939 all the petroleum oil firms were taken into an arrangement known as the 'pool'. The oil and petrol companies formed one pool, lubricating oil firms formed another. During the war only a single grade of petrol was produced for civilian use, with quite a low octane rating (improved slightly in 1942). Petrol was not 'branded' during the war and no advertising was used. These arrangements continued until 1953, at which point the petrol companies resumed their advertising and gradually reintroduced their multiple grade distributions.

The UK oil industry was moderately stable until the 1960s, the listings below are divided into companies that operated in the UK before 1960 and those that appeared after that date.

Pre 1960s Brands

Carless
This was one of the first UK oil companies, formed in 1859 by Eugene Carless. Carless became the leading distillery in Britain for the newly imported American crude oil, and made advances in refining coal tar and shales, from which were derived benzolene, paraffin oil, burning naphtha and carburine. In 1872 a partnership with George Bligh Capel and John Hare Leonard brought a name change with the company trading as Carless, Capel and Leonard. Leonard became the sole proprietor within eighteen months. Following a merger with a nearby chemical firm run by a Frederick Simms (who was associated with Gottlieb Daimler) Simms suggested the trade name of Petrol, to be used for a motor launch spirit in 1893, and this was accepted by William Leonard. It was not however accepted for registration as a trade mark as it was regarded by the Registrar as a descriptive word. Marketing petrol firmly linked the firm with the motor car and Carless Capel and Leonard supplied their new fuel for the Emancipation Run to Brighton in 1896. Simms and Leonard were both founder members of the Automobile Club, later the R.A.C. At the turn of the century Carless Petrol was still virtually the only British source of highly refined motor spirit, and by 1906 the firm had 1,500 agents throughout the country. In 1909 or thereabouts they had tank wagons branded 'standard petrol' with the word 'Movil' in smaller lettering centrally below the filling dome above the Class A band with the company name below the band also in red. By the 1930s the branding was Caress petrol in red above the Class A band with the company name in black below the band and under that Petrol & Naphtha Distillers.

Fig ___ Carless 'Petrol' tank

Carless 'Petrol' branding

The company developed the Coalite solid fuel in the 1920s and made TNT during the 39-45 war. The Company opened a new refinery at Harwich in 1964 taking on gas condensate from North Sea Oil. In 1965 a refining and storage depot was established at Longport, Staffordshire. With increasing demands for capital, Carless Capel and Leonard became a public company in 1971. Carless Petroleum was established as subsidiary in 1973, and Carless was also involved in on-shore fields at Humbly Grove and Wytch Farm. Production ceased at Hackney Wick in the early 1970s and the administration moved from the Hope Works to Petrol House, formerly a dry cleaning factory owned by Lush and Cook. The subsidiary Carless Solvents moved to Romford in 1984 and Carless Petroleum moved to Colchester in 1977. The parent company continued trading as Carless, Capel and Leonard Ltd from 1872 to 1989. In 1989 the Company was taken over and broken up and a new company, Carless Refining and Marketing, was established as a wholly owned subsidiary of Repsol at Romford, they specialised in the production of high quality solvents, oils and speciality products for industry. The company was a leading supplier of solvents to the printing ink industry for over forty years. By the early 21st Century Carless Refining and Marketing was owned by a Spanish firm. It was then bought and merged with a company called Petrochem, (formed in 1981) to become Petrochem Carless, since when wagons bearing the new company branding have been seen on the railways.

Young's Paraffin Light and Mineral Oil Company of Pumpherston, Pumpherston Oil Co. Ltd, Mid Calder Oil Co, Broxburn Oil Co, Clippens Oil Company of Paisley, Oakbank Oil Company of Midcalder, Caledonian Mineral Oil Co. Ltd., Cobbinshaw and the Midlothian Oil Company of Straiton.
These were all Scottish producers of Paraffin oils from mined shales. Paraffin (so named on account of its want of affinity with most chemical substances) was discovered more or less simultaneously by Reichenbach in Germany and by Dr Christison, of Edinburgh in about 1830. By the early 1830s people were experimenting with recovering this oil from shale deposits (up to this point these had been seen merely as colliery waste). In the 1840s a Manchester chemist by the name of James Young was asked to investigate oily deposits occurring in a coal mine at Alfreton, Derbyshire. He discovered that it contained small quantities of paraffin and set up a works to extract this material close by the mine. The process is more fully described above. Scotland's oil production began in the 1850s with James 'Paraffin' Young's first works producing oil from the coal-like Torbaneite mineral deposits near Bathgate. There was a shortage of oil (mainly for lamps) and the whale oil and vegetable oil industries could not meet the demand. Mr Young's new process seemed to have developed just at the right time, but the emergence of cheap American mineral oil reserves threatened the fledgling industry. A Midlothian pioneer William Young (no relation of James) further developed the process or refining shale and allowed Scotland's oil industry to survive.

Young's Paraffin Oil Co Ltd. was for a time the largest of the Scottish shale oil firms and also the only one to make and sell oil lamps. Young's Oil Coy Ltd were operating branded 10 ton tank wagons in 1902 (registered on the North British Rly) and built up a fleet of tank wagons. Young's was purchased by BP in 1919 but their liveries (they had several) probably survived for at least ten years or so (quite possibly longer - see Oakbank Oil Co below).

The Oakbank Oil Co works opened in the mid 1860s (as the original shale oil patents expired). This company operated the first all-electrically powered Scottish mine in 1903. By the mid 1930s all the mines were operated by electricity and they even established their own local 'grid' to distribute power supplied by power stations at the retort works. The Oakbank company had an interest in high capacity tank wagons, including a six wheeler (rather similar to the 1930s milk tanks) and a couple of bogie tanks (they also operated a fleet of more conventional tanks). There are proper drawings in Mr Tourret's book on Petroleum Rail Tank Wagons (see Bibliography for details), the sketches below are mine and may well be wrong in detail. Oakbank's brand continued in use after the take-over by BP in 1919, they were still having wagons built and in their livery in 1940. The bogie tanks survived into BP ownership into the 1960s (again see Mr Tourret's book for details).

Fig ___ Oakbank tanks
Scottish shale oil Oakbank tanks

The Pumpherston Oil Co was operating a 10 ton twin cylinder tank wagon in 1908, although the lettering on such small tanks would represent a challenge. Registered on the North British Railway this wagon was very similar in appearance to the N Gauge 'twin gas tank' wagon kit from W&T.

Broxburn Oil Co operated some sulphuric acid tanks and presumably also operated tankers for paraffin and liquid residues.

Fig ___ Scottish shale oil company logos
Scottish shale oil company logos

Scottish product names such as Smith's Royal Standard Lamp Oil, Sunlight Oil, and Taylor's Paraffine were all well known brands, Royal Standard Oil became (briefly) a worldwide brand (and many a Scot will tell you it may have prompted the choice of name in America of Standard Oil). The imported American lamp oils were cheaper but had a lower flashpoint which meant they were more likely to cause fires if spilled. In response to increasing public concern over deaths from oil lamp accidents, the Scottish oil producers campaigned to restrict competition from unsafe imported oils and highlighted the safety merits of their own products.

Fig ___ Royal Standard adverting plate (post 1919)
Scottish shale oil Royal Standard adverting plate from after the BP takeover in 1919

Scottish Oil Agency Ltd, this organisation was (I believe) a distribution business, handling the output of the shale oil works. It was set up with Government backing during World War One. They expanded between 1918 and 1920 by absorbing other Scottish shale oil companies distribution services. They operated Class A and Class B tanks (some apparently carrying lubricating oils) and were still building distribution terminals in the later 1920s. I think they were later absorbed by Scottish Oils Ltd (but I am not certain on that).

Fig ___ Scottish Oil Agency Ltd tank
Scottish shale oil Royal Standard adverting plate from after the BP takeover in 1919

Scottish Oils Ltd This company was created in 1919 when APOC (BP) took over Young's, Oakbank and Pumpherston and in 1924 APOC built their refinery at Grangemouth on the Forth estuary near Edinburgh, for which this company provided at least some of the tank wagons. In the mid 1920 there were about 13 mines in operation (the mines tended to last only about five years as the deposits were scattered across the area) supplying the 6 remaining oil companies, all subsidiaries of Scottish Oils Ltd. I have not (yet) found any reference to Scottish Oils Ltd takers, the various shale oil companies seem to have continued trading under their original names (although many products were branded 'It's a BP Product', as per the Royal Standard lamp oil advert shown above). It may be however that the existing tanks were not repainted for some years.

Fig ___ Scottish Oils Ltd tank
Scottish shale oil Royal Standard adverting plate from after the BP takeover in 1919

Shale oil production in Scotland ceased in the early 1960s but there was an unsuccessful attempt to revive it in 1973. Scottish Oils Ltd still exists but is no longer in the shale oil business. According to the TUC The Young's Paraffin Light and Mineral Oil Company still have an office in Aberdeen and I gather that BP has a 'Pumpherston Works' but I don't know what it makes.

The first major foreign oil company to set up in Britain was the Anglo American Oil Co in 1888, this was the British distribution network for the American Standard Oil Co, these days known as Esso (Eastern Section Standard Oil) however Royal Daylight was the trading name which was used for their paraffin and domestic oils ranges and on many of their rail tank wagons. They used the name Standard Bitumen on at least some of their bitumen wagons prior to the mid 1930s.

When they started marketing motor spirit in 1896 they adopted the name Pratt's, sold as Pratt's Motor Spirit and later as Pratt's perfection Spirit. In the later 1920s the apostrophe was dropped and in 1928 they introduced Pratt's Ethyl (in 1921 a Mr Midgley in America discovered that adding tetraethyl lead (TEL) to petrol eliminated engine knocking. Subsequently several brands acquired the ethyl suffix).

Fig ___ Pratts logos

Pratts logos

The Pratts brand is associated with one of the very few pre-war Class A bogie oil tankers, it was re-painted with the Esso logo in the later 1930s and soldiered on for several years but I do not know if it survived World War Two (the wagon and markings are described in the section on Goods Rolling Stock - Rail Tanks, Esso were always at the forefront of rail tanker use, owning up to a quarter of all the tankers in use at one time). The Pratts Perfection Motor Spirit name continued in use in England until 1935-6 when first Essolube (for oils) then Esso (for petrol) replaced the older brands.

Fig ___ Esso logos from the later 1930s

Esso logos from the later 1930s

The Esso logo was originally just the lettering as shown above, the `Esso' logo with the blue oval was introduced in 1938/39 (hence a lick of paint can back-date a wagon to pre-war livery). The illustration below shows Esso delivery lorries in the 1960s (left) and later 1970s (right).

Fig ___ Esso lorries in 1960s and 1970s livery

Esso lorries in 1960s and 1970s livery

Esso also sold paraffin, in the 1930s they used the Royal Daylight Paraffin brand, changing to Esso Blue after the war. This was a Class A liquid but as far as I am aware the rail tankers were not branded for this traffic.



Fig ___ Esso rail tank wagons showing evolution of liveries

Esso tank wagons showing evolution of liveries

Esso built a large refinery at Fawley on the South Coast in 1949 (there had been a refinery there since 1921 but I am not sure who operated it). Esso became part of the Exxon Corporation in 1978.

Mobil
This was established as the Standard Oil Company of New York, following the 1911 break up of Standard Oil and merged with the Vacuum Oil Corporation in 1931. The company traded in Britain as the Vacuum Oil Co from 1885 selling lubricants under the Mobiloil brand. Their oil blending and grease plant at Birkenhead (set up in 1910, after the warehouse burned down) included a grease plant and blending facilities and it was extensively developed until by 1939 it was one of the largest and most important blending units of its kind in Europe. This was bombed out in the war and rebuilt (lubricants are vital in wartime). Mobiloil was a major brand by the 1930s and in 1953 they purchased an oil storage depot at Coryton on the Thames and built a refinery there (beside the existing Shell refinery at Shell Haven) which came on stream in 1953. They then began selling petrol, originally under the Mobilgas name.

Fig ___ Mobilgas lorry in 1950s livery

Mobilgas lorry in 1950s livery

I have found a reference to a 20 ton Class A anchor mounted rail tanker branded Mobil and owned by the Mobil Oil Co.Ltd. built in 1949 but I am not sure when that branding was applied to the wagon. It was in 1963 they changed their name to Mobil, introducing a new logo but still incorporating the flying horse, although Mobiloil continued as their oil brand until the 1970s. Mobil was the first major brand to adopt self service on a large scale in the mid 1960s. In (I think) the later 1980s they changed their logo to just the word Mobil with the 'O' in red and no flying horse. In 1996, Mobil's fuels operations in Europe were placed into a joint venture 70% owned by BP and the Mobil petrol brand disappeared from service stations. Mobil continued to sell lubricants through BP and independent service stations. In 1999 Mobil merged with Exxon and in 2000 BP acquired all the former Mobil petrol retailing assets as well as the Coryton refinery (but sold the refinery to Petroplus in 2007). Mobil returned to being purely a lubricant brand in Europe, and became the premium quality oil on sale at Esso service stations.

Fig ___ Mobil signs and pump tops

Mobil signs and pump tops

Around the end of the 19th and early 20th century the British oil industry expanded rapidly, Shell, Russian Petroleum, Anglo-Persian Oil Co, and Anglo Mexican Oil were all set up between 1890 and 1914.

Burmah Oil Company
This was set up in Glasgow in 1896 with the intention of developing oil interests in India. It was an early shareholder in Anglo-Persian Oil Company (APOC) and was the only oil company to operate in Burma until 1963 (when the oil fields were nationalised). Burmah was primarily an oils and petrochemicals company, petrol was always something of a side line. However in the 1960s Burmah began selling via petrol stations under their own brand, in the later 1960s they bought out the Curlew discount chain of stations (which they re branded Burmah) and the Major and Apex chains (which they did not re-brand as these were established firms). I have not yet found any illustrations of pre-1960s Burmah tanks, I assume they had some, the sketch below is based in a rather poor photo taken in the late 1960s or early 1970s I believe.

Fig ___ Burmah Oil tank

Burmah Oil classA tank

In 1966 they purchased Castrol Oil (the main British lubricant manufacturer). Halfords, the motor parts supplier, became a part of the Burmah Oil in 1969, following a takeover battle between Burmah Oil and Smiths Industries (Halfords was sold off again in 1983). In the 1970s Burmah Oil ran into financial difficulties and had to be helped out by the Bank of England, in 2000 the company was bought by BP-Amoco (now BP).

Fig ___ Burmah Oil - old logo and petrol station sign (introduced in 1969)

Burmah Oil - old logo and petrol station sign

APOC & British Petroleum (see also Shell-BP below).
BP is one of the world's largest oil companies and is today (1987) Britain's largest company. BP began life as the Anglo-Persian Oil Company (APOC) in 1909, in 1913 APOC was partially nationalised in order to secure oil supplies for the Royal Navy and in 1917 they purchased a German owned oil distribution company called British Petroleum and established this as their main marketing subsidiary. Hence most road and rail tank wagons were thereafter marked BP rather than APOC. The wagons shown below are both unusual, the twin tank is in standard APOC livery, the two-compartment tank is in early BP livery (although this should I believe be a serif font not plain as shown).

Fig ___ APOC and early BP liveries

Sketch showing the APOC and early PB liveries

Regarding branding they used B.P. in a plain font but with the full stops on many items, and British Petroleum (in full and in a serif font) was the norm on tank wagons. In 1920, they held a staff competition to design a new logo and came up with the shield design. In 1921 there was at least one Class A wagon branded B.P. MOTOR SPIRIT but I am unsure as to the details of the logo used. I think the flag design (often seen as a tinplate sign in garages) came after the shield as the BP has the inverted commas round it and resembles the lettering used for the shield design.

Fig ___ BP logos

Sketch showing the various BP logos

APOC changed its name to the Anglo Iranian Oil Company in 1935 but as far as I am aware the AIOC logo was never used. The name changed again to the British Petroleum Company in 1954. The company was fully developed oil company marketing a wide range of oils as well as petrol. They sold a lot of paraffin under the brand name 'Aladdin Pink' (the name changed after World War Two to 'Pink Paraffin'). The pink dye was added as a safety feature in order to prevent paraffin being mistaken for other liquids. An uncoloured form was sold (much more cheaply) as ‘White May’. BP acquired the chemical interests of the Distillers Company 1967 (Distillers group had purchased a small pharmaceuticals company which was doing well on the sales of a new drug called Thalidomide. This drug was then found to cause birth defects, as the new owners Distillers were held liable and had to sell most of their assets to pay the compensation and legal costs. Distillers, one of the countries biggest companies, was dramatically reduced in size).

BP built a large refinery at Coryton on the Thames in 1953 (where there had been a tank farm for imported oil for many years).

From 1932 until the end of 1975 Shell-Mex and BP had an 'Agency Agreement' in which they pooled their distribution network. During this period a lot of tanks were pooled and marked Shell BP, however petrol tankers could not be pooled as the two petrols were different. Hence Class A tanks in BP livery continued in use up until World War Two when the standard wartime dull grey livery was applied. As of 31 December 1975 BP Oil Limited became the BP group's wholly-owned refining and marketing subsidiary in the United Kingdom.

Shell (see also Shell-BP below).
Shell is an Anglo-Dutch oil-development and exploration concern Royal Dutch/Shell Group, and is one of the world's biggest companies. The business originated in the early 19th century with a curio shop in East London that sold shell ornaments. By the time the railways arrived in 1830 the dealer, Marcus Samuel, had built up an international trade in copra and oriental artefacts. They spotted a hole in the market for oil transportation from the main European supply in Baku (then Russia now Azerbaijan). The Rothchilds had invested heavily in building railways and digging tunnels to get the oil to the coast but a certain Mr Rockefeller (owner of Standard Oil) had monopolised the wooden barrel market (Standard Oil played rough, a bit like Microsoft in the later 20th Century). Mr Samuel and his associates commissioned (in secret) a fleet of oil tanker ships (it had to be in secret or Rockefeller would have seen to it that they failed.) Then oil was found in the Dutch East Indies and they built ships to bring the oil through the Suez canal to Europe. 1897 The Samuel brothers initially called their company The Tank Syndicate dealing in oil and kerosene (paraffin oil) using the name Asiatic Petroleum Company but in 1897 renamed it the Shell Transport and Trading Company. The British owned Shell Transport and Trading Co was then merged with the Royal Dutch Petroleum Company in 1907 becoming one of the worlds first multi-national companies. The company continued to expand and took over the Anglo Mexican Oil Company giving the brand name Shell Mex (this must have been in the early 1900s). The illustration below left is an early Shell Mex pup-top globe. Prior to World War Two Shell was the best selling petrol in the UK. Over the years there have been various changes to the logo as shown below with the date of introduction (they also used a plain red shell symbol on some of their advertising signs).

Fig ___ Shell logos

Shell pump globe and logos


In 1912 the company built a tank farm at Shell Haven (the name is nothing to do with the company the place was already called that) and refining started at the site in 1916. Prior to 1917 Shell used British Petroleum to distribute their product in the UK, however at that time BP was a German owned company and during World War One this told against the Shell brand, who therefore set up their own in-house distribution network. In 1948 a further expansion at Shell Haven added a 'crude distillation plant' to handle oil from Kuwait (this took two years to build, opening in 1950). The Shell refinery at Stanlow dates back to 1924, when a small bitumen plant was established at the site, bringing in the crude product in rail tankers and shipping out the refined products. The site was built up over the years into a full oil refinery, in the 1970s an oil pipeline was constructed from Amlwch, Anglesey to Stanlow so that large tankers could pump oil ashore for the refinery but rail tank traffic remained a major feature, shipping out the product of the plant. The Anglesey pipeline closed in the 1980s, replaced by a much shorter 15 mile line to the Tranmere Oil Terminal on the River Mersey. Output is delivered by pipeline via the UKOP pipeline, road, rail, and the Manchester Ship Canal.

The Shell business has always made use of rail transport, however the matter of livery seems a little complicated. The examples shown are intended to give some idea of the basic liveries applicable to the stated periods, to assist when selecting a ready-to-run model. However this is a tiny selection and if modelling a wagon you need a good photo (Mr Tourret's book on tanks wagons is a good starting point, see Bibliography)

Fig ___ Shell tanks pre Shell-BP

Shell tanks


In 1927 they had at least one triple compartment tank with odd external pipework and a discharge pump on one end marked Shell Lubrication Oil (their number No.2454 1927 and registered on the LMS), this had a very light coloured body with (I think) red lettering. I believe Shell were also behind a company called Lubricant Oil Producers who operated 45 ton tanks in the later 1960s.
Shell is the world's largest oil and gas producer, with the largest oil reserves, and is responsible for 5% of the world's oil and gas production (1987). It has 2,000 operating companies worldwide. It is also the world's largest retailer, with (1994) 40,000 petrol stations in 100 countries. Its sales turnover in 1992 amounted to more than the gross national product of any country except the 23 richest.

Shell-BP
Shell-BP was a joint oil shipping and marketing operation within the UK only, set up in 1932 when the Great Depression hit. The statement released was as follows:
" The Anglo-American Oil Company, the Anglo-Persian Oil Company, the Burmah Oil Company, the Mexican and Canadian Eagle Oil Companies, and the Shell group of companies, considering that the present currency difficulties can best be met and most speedily brought to a successful conclusion by the closest possible industrial co-operation, have decided to that end to collaborate to the fullest extent in the United Kingdom. They will accordingly develop ways and means to secure that this co-operation will afford the unhampered supply of the requirements at the lowest possible cost. They hope that other industries and similar organisations will follow their example. The world is faced with the most serious crisis in its history, and co-operation amongst the industrialists is the main factor which must tell in the end in providing the remedy for the world's present troubles, because industry provides the only real necessities of life and gold need not play such an important role".

Originally S.M. & B.P.'s was owned 40% each by Shell and BP and 20% by the Eagle Group but in 1959 the Shell group took over the Eagle group, and their 20% share of ownership.

This joint operation lasted until 1976 when Shell and BP again split their distribution networks. During this period the lorries and railway tanks were marked SHELL-BP. Not all the railway tanks were marked in the joint logo however, the specialised oils were not joined and motor spirit (petrol) tanks remained separate as the two petrols were different The basic livery for Class B tanks is shown below on an elderly rectangular tank (some shell-BP tank in the 1960s dated back to the 1880s).

Fig ___ Shell-BP tank wagon in early livery

Shell-BP tank in early 1930s

There were many variations on the livery, I read somewhere that some class A tanks had the word SHELL (plain lettering in red, not the logo) on one side with BP (in a serif font and green) on the other, both in lettering about three feet high, these would not have been used for petrol (the two brands were different) but may have been used for other Class A liquids. This asymmetric marking was I believe the standard on the road tankers until after the war when the logos were used in place of the names. The picture below is a 1925 Thornycroft with a 600 gallon (2,728 litres) tank (Shell bought six of these in 1925). The illustration based on a tracing of a photo of a restored tanker on show at Hampshire County's collection of rare Thornycroft vehicles at Milestones.

Fig ___ Shell-BP lorry in early 1932

Shell-BP lorry in early 1930s

In about 1955 the road and rail tankers changed to having the company logo's on the sides in place of the names. On the lorries these were at either end of a white rectangle (the tank body was red), in the centre was a red rectangle with the words 'petroleum products'.

Fig ___ Mid 1950s to early 1960s Shell-BP lorry markings

Shell-BP tank lorry markings in mid 1950s

In Mr Tourret's book on Petroleum Tank Wagons (see Bibliography) there are photos of Class B tanks bearing variations this sinage, but I am not sure if they ever ran in traffic. The sketch below shows an in-traffic wagon using the new logos. The sketches below are typical for the later 1950s on.

Fig ___ Shell-BP tank wagons in post war livery

Shell-BP tanks in post war livery

From 1966 the Shell and the BP Service Station networks were managed by separate sales organisations within Shell-Mex and B.P and in 1976 the two companies decided to end their co-operation in the UK distribution market. The road lorries were then re-branded with the individual company livery, although the rail tankers took a lot longer to be brought into line.

Fig ___ Shell-BP lorry in early 1960s

Shell-BP lorry in early 1960s



Benzole & By-Products Ltd
This company, of Mitcham, Surrey, had some Class A wagons built in the 1920s which were marked as carrying '"B.M." Motor Spirit'.

Carburine Motor Spirit & Glico Petroleum
The Gas Lighting Improvement Co Limited based at West Ham marsh, London was established in 1888. By about 1900 they were selling Carburine motor fuel (derived from coal tar) and operating a small fleet of Class A tankers to carry it, initially branded with the company name above the red line and London below with the number to the left and the 'no naked light' warning to the right, both below the line.

Fig ___ Carburine enameled sign

Carburine logo

By 1914 they were selling 'Carburine' and 'Gilco' motor spirit and motor oils, as well as 'Gilco' turps, benzene, benzolene, benzol and even solvent naphtha for paint and varnish manufacture. The name 'Glico' is actually the company initials (Gas Lighting Improvement Co), in much of their earlier advertising they had used G.L.I.CO and the customers started asking for Glico. In the 1920s they changed the company name to Glico Petroleum, however Carburine was an established brand and remained in use in parallel with Glico (the tank on below right was built several years after the name changed but was still branded Carburine). In the later 1930s they merged with Redline to become Redline-Glico. This company was taken over by Esso in the later 1950s.

Fig ___ Carburine & Glico tanks

Carburine tanks



Redline
Originally the Union Petroleum Products Co, selling 'Redline' and 'Ensign' brands of petrol the name changed to Redline Motor Spirit Co in the later 1920s. Early tanks resembled the example shown but had 'redline and ensign' above the central band, the word 'and' being half the height of the other two words, and 'motor spirit' below the band. The plate shown below was on top of one of the early 'iron maiden' type petrol pumps (the subsequent illuminated glass 'globes' were initially the same shape, later changing to round).

Fig ___ Redline tank and advertising plate

Redline tank and advertising plate

Following the merger with Glico in the later 1930s the brand above the Class A tank band was Redline Glico, they sold three grades 'Super Ethyl Petrol', 'Super Petrol' and 'Benzol Mixture'. Redline-Glico was a successful company, recognised as one of the larger UK companies but they were bought out by Esso in the later 1950s. The example livery shown serves from the mid 1920s through to World War Two. The illustration below shows a 1935 Leyland lorry in what I believe was the Redline-Glico road vehicle livery.

Fig ___ Redline-Glico road tank livery

Redline-Glico road tank livery on a 1935 Leyland Bever tanker

National Benzole
This company was formed in 1919, 'Benzole' refers to an additive they employed, derived from coal tar. During the war plants had been set up to recover benzole for explosives manufacture, when the war ended the National Benzole Co. Ltd. was formed as a co-operative selling organisation by the benzole producers. At first they simply sold the benzole for use as an alternative to petrol, motorists liked the product but some preferred to mix it 50/50 with petrol (where it this prevented engine knocking and improved acceleration and smoothness). In 1922 the National Benzole brand (selling the benzole petrol mixture) was set up, obtaining its petrol supplies from B.P.

. National Benzole used a picture of Mercury (they called him Mr Mercury) in advertising and adopted the head (in black and gold) as their logo. The mixture proved to be very popular with British motorists and the National brand became a common sight at the roadside.

Fig ___ 1950 Austin K4 5 ton lorry in 1950s livery and tank in early 1960s livery

National Benzole lorry in 1950s livery and 14 ton tanker showing early 1960s livery

After the war they were the UK's best selling brand but were taken over by Shell-Mex-BP in 1957 (their operation being merged with the Power Petroleum business). During the late 1950s Benzole was found to be hazardous to health and therefore from the early 1960s onwards National only sold petrol, at this time they changed the logo to a 'more modern' yellow blue and white design, although still based on the Mr Mercury head.

Fig ___ National Benzole logos

National Benzole logos

From the later 1980s BP steadily re-branded the 'National' stations as BP, but in 2001 a Scottish firm (Scottish Fuels, formed in 2001 by buying some of BP's local assets in Scotland) licenced the name and for several years there were several stations using it, although the petrol was supplied by BP.

Dominion
This company started in 1923, supplying imported Russian petrol to English filling stations but became a wholly-owned subsidiary of Sealand Petroleum Co. Ltd. when that company was incorporated in 1926 (Sealand was the UK branch of the US company Marland Oil which at the time owned 10 percent of the worlds oil reserves. Marland later became Conoco, re which see below). Sealand was sold off in 1933 to Shell-Mex & BP Ltd, however the Dominion name continued to be used as a discount brand at free stations until 1957. Dominion petrol stations sold Royal tyres (made in Canada I believe). The original Dominion pump globe was a distinctive pyramid topped affair (below left), this was to be replaced in the later 1930s by a more rectangular design, however this does not seem to have caught on and at a lot of stations the old design was shown as an outline drawing on a spherical globe.

Fig ___ Dominion Petroleum logo and globes

Dominium petroleum co logo and early and late pump globe designs

I could not find any reference to a UK refinery owned by either Dominion or Sealand/Marland, nor could I find any reference to either rail or road tank wagons. They may have had both but equally (prior to the takeover by Shell-BP) they may have used hired-in rail tanks and set up distribution arrangements with local hauliers.

Russian Oil Products (R.O.P.)
This was a UK registered independent company set up in 1925 that distributed Russian petrol from the Caspian Sea within the UK during the 1920s and 30s, branded as R.O.P. and also as ZIP for their premium grade petrol. R.O.P. was sold to Regent in 1948. They had no refinery but bought petrol on the 'spot market' via brokers and sold it on to the retailers, usually at below oil company prices. This would entail a simple 'tank farm' close by a port. They had a fleet of both Class A tanks (for petrol) and Class B tanks (for paraffin, marked Kerosene, illustrated in Mr Tourret's book on petroleum tank wagons).

Fig ___ R.O.P. tanker and pump globes

R.O.P. tanker and pump globes



Power Petroleum
Originally formed as the Medway Oil & Storage Co they operated a refinery on the Isle of Grain cracking imported Russian paraffin. Power Petrol was their distribution business set up in the early 1920s (the company then changed its name to Power Petroleum). They bought their supplies of Russian oil on the spot market and sold this on to retailers. This would entail a simple 'tank farm' close by a port. They were operating tank wagons from the mid 1920s (possibly earlier). They were taken over by the joint Shell-Mex & BP Ltd. distribution organisation in 1934 but the brand continued in use for some time under the new ownership, the sketch below shows pre-war and immediate post-war tank liveries. Their 'logo' in the 1920s and 30s consisted of a raised hand with the word Power on it as shown, they had glass pump globes made in this shape. Post war the globes were a simple flat sided diamond shape with the word Power on them in green (these may have appeared in the later 1930s).

Fig ___ Power petrol tanks

Power petrol tanks

The illustration below shows the 1950s livery for road tankers (taken from a 1:76 scale Vanguards model) and the post war petrol pump globe design.

Fig ___ 1950s Power petroleum road tanker and post war pump globe

Power petrol road tanker and post war pump globe

Cleveland Oil
Cleveland petrols were formed in 1928 as the Petroleum Storage and Finance Corporation Ltd. to acquire the undertaking of Cleveland Petroleum Products Company and to carry on business as shippers, importers, exporters and distributors of petrol and allied products. They were supplied by ICI with benzol (and possibly synthetic petrol) and by Distillers Ltd with alcohol which they blended with petrol, marketing their fuels as Cleveland Motor Spirits and Cleveland Discol Motor Spirit respectively ('Discol' was an abbreviation of Distillers Company Alcohol). I could not find any reference to an refinery owned by Cleveland (Standard Oil of New Jersey was a major partner in the original business) however by 1938 Anglo-American owned 51 percent of the share capital and in 1954 it acquired a further 37 percent In 1958 Cleveland became its wholly-owned subsidiary of Esso (as it was then called), but the Cleveland name and blended fuels continued in production, trading as the Cleveland Petroleum Products Co. This gave Cleveland five different petrols at a time when many firms had only two or three. Cleveland also marketed their Iceberg brand of oils and greases. In April, 1963 Cleveland had changed the name of its 50/50 Mixture (i.e. a mixture of 50 per cent, standard grade and 50 per cent, premium grade petrol) to Cleveland Premium, but the octane rating (94$) and the retail price (4s. 7d.) remained unchanged. This annoyed Shell and BP as it effectively undercut their own (higher octane) 'Premium' brands. In 1973, Esso chose to end the Cleveland brand and gave up selling benzole or alcohol blends. Cleveland's 2,000 filling stations were switched to the Esso brand. The illustration shows the pre-war logo and what I believe was the post war delivery lorry livery.

Fig ___ Cleveland pre-war logo and post war lorry livery

Cleveland pre-war logo and post war lorry livery

Cities Service Oil Co
Set up in 1927 as the British arm of a very large American oil company (the odd name came from their involvement in providing municipal services in the US). In the 1930s this firm had a fleet of Class A tank wagons carrying their 'Citex Motor Spirit' in the UK which they supplied to independent retailers. One of their brands was 'Citex Koolmotor alcohol blend spirit', a petrol with 25 percent alcohol mixed in, introduced in 1932 (the petrol being imported from America and the alcohol sourced in the UK). At the time Nature magazine commented; A mixture of alcohol in petrol has been in common use in racing cars for a year or two, but now the ordinary public will have for the first time an opportunity of testing its merits, in particular the absence of knocking. The British petrol supply business was bought by Petrofina (of Belgium) in 1953 and re branded Fina. The American company changed their name to CITGO in 1965 and were bought out by Occidental Petroleum in 1982 it is now owned by a Venezuelan company.

Fig ___ Cities Service logo and Citex petrol tin

Sketch showing the Cities Service logo and Citex petrol tin

Cory Brothers
This company were based in London, they built an oil storage depot (and possibly a refinery) at what is now called Coryton on the Thames. They had operated a fleet of Class A tanks in the 1920s and 30s branded Corys Motor Spirit and Class B tanks branded Corys Fuel Oil. In 1950 they sold the Coryton site to Vacuum Oil Co (Mobil Oil) and ceased selling petrol.

Fig ___ Cory's motor spirit 2 gallon can
Cory's motor spirit 2 galon can
This firm started life as a coal merchant on the grand scale, Cory Bros mines in Wales supplied coal to ships coaling stations around the world. They were at one time the owner of the largest private owner wagon fleet in the UK (mostly coal wagons, the tank fleet was never very large). In 1942 the company was bought by the Powell Duffryn Group, but maintained its identity. In the 1960s Cory's were a distributor for Shell-BP domestic heating oils (a business they stayed with until the 1980s). The road delivery tankers were branded Shell-BP but had the Cory logo on the cab doors (illustrated above under 'Distribution Centres and goods-yard retailers')and in the later 1960s they were involved with Hovermarine, a hovercraft company. They operated 'shipping agents' in many ports (I know this company well as they were one of the shipping agents used by the P&O). In 1972 W.M. Cory & Son was bought out by the Ocean Group (an international shipping and distribution company). In the 1980s they closed down the oil distribution business. The Coryton district of Cardiff is named after Sir Herbert Cory, one of the brothers of the title.

Fina
This is the British arm of the Belgian company Petrofina, they started trading in the UK in the later 1940s but only established a British retail brand in 1953 when the bought out Cities Service Oil Company Ltd. (an existing distributor of petroleum products) and several small distribution chains. Fina ware themselves bought out by Total in 1999.
Fina were buying and using railway tank wagons in their livery by the later 1950s (some of which were second hand stock). They have operated rail tankers, both Class A and B, in their livery. In the early years the Class A tanks were silver or very light grey with the word FINA about 30 inches (75cm) high on the upper side in red outlined in black. Under this was 'motor spirit' in black. The Class B tanks used the company logo, usually to the left and with 'fuel oil' in lettering about a foot high on the right.
The illustration below shows the early logo (left, still in use in 1958) and the more recent logo (right, in use by 1964).

Fig ___ Fina tank logos and petrol pump globe

Sketch showing Fina tank branding

By the later 1960s newer Class A tanks were dove grey and carried the standard Fina 'shield' logo to the left end of the tank, however I believe some of the new tanks used the old Class A livery (as seen on the Peco model below). The company used both 45 ton tanks and 100 ton bogie tanks in the new dove grey livery. The the 100 tonner livery was sketched from a photo taken in the late 1970s

Fig ___ Fina Class A tank markings

Sketch showing Fina tank branding

Total
This is a French company (a subsidiary of Compagnie Francaise des Petroles), Total was incorporated in the UK in 1955, started selling in the retail market in 1958 and began using rail tanks in 1968 to transport fuel imported from French refineries. Initially the UK business sold their product only to independent filling stations but from 1960 began buying their own petrol stations which they leased to tenants. Their (leased) Class B 100 ton bogie tankers were as shown below in the early 1980s, later in that decade they leased some four wheelers as shown below right.

Fig ___ 1980s leased tanks in Total livery

Sketch of 1980s leased tanks in Total livery

TOTAL operates two refineries in the UK, Lindsey Oil Refinery in Immingham (shown on the map as Killinghome and jointly owned with Fina plc.) and Milford Haven Refinery in West Wales.

Regent
This company appeared in the 1920s as and independent petrol station chain (no refineries they were just a distributor), they were purchased in 1930 by the Trinidad Oil Company to sell their (imported) products in the UK. They had a number of tank wagons during this period but I am unsure as to their livery (they bought some in Class A tanks 1942). The Regent Oil Company was formed in the United Kingdom in 1947 as a joint operation between the Texas Oil Co (Texaco Petroleum Products - see Texaco below) and the Trinidad Leaseholds Company. Texaco was an American petroleum company that had been operating in the United Kingdom since 1916. During the 1950s, Regent began to expand its operations, including selling branded petrol in the UK as well as shipping and refining ventures abroad. They operated large (for the time) tankers using ports such as Gloucester. Regent was then completely taken over by Texas Oil (Texaco) in 1956 but was then run as a joint operation by the US companies Texaco and Chevron until 1967. One retailer in 1956 displayed the notice: " Sold!—Regent to America together with the independence of thousands of British garages ". Texaco opened its Pembroke Refinery in South Wales in 1964.

Fig ___ Regent tanks

Regent tanker livery in 1960s

In 1967 the joint Texaco Chevron operation was wound up and after that date Texaco began replacing the Regent brand with the Texaco name. However, in 2004 the Regent brand name was reintroduced as Texaco consolidated some of its smaller brands under one name that would be familiar to UK customers.
The illustration below left is based on a Corgi model of a tanker in Regent livery, I believe the livery dates from the 1950s, the illustration on the right is based on the Vanguards 1:76 model and (I believe) shows the later livery.

Fig ___ Regent lorries in the 1950s and 60s

Regent lorry livery in 1960s

The picture below left is from a Regent ad from 1963, the lorry is delivering lubricating oils to a ship (hence the two ships officers). To the right are the original square and oddly shaped Regent pump glove and the later (late 1950s) design.

Fig ___ Regent lorry delivering lubricating oil in 1963 and pump globes

Regent lorry delivering lubricating oil in 1963

Regent stations sold Havoline lubricating oils (owned by Texaco) branded as 'A Regent Product' and their 'own' brand of paraffin, branded 'Super Green'.

Fig ___ Regent logo, Havoline Oil (a Regent product) and paraffin sign

Sketch of tin of Havoline branded as 'a Regent product' at Regen paraffin sign



Jet
This company was established in 1953, owned by and supplying a group of commercial vehicle owners. They started selling to other haulage firms, buying their fuel from Regent (Jet has never owned a refinery, it is an oil dealer). Jet then started building ocean terminals with large tank farms to take imported oil, mainly from Germany.

Fig ___ Jet's first lorry in the 1950s

Jet lorry livery in 1950s

In 1958 Jet entered the retail market, selling via independent petrol stations to the general public. A survey carried out by Jet at this time showed that about 7 per cent of all retailers in the United Kingdom were free of solus ties. At first Jet followed the price levels of the larger companies, but in early 1960 it adopted the policy of lower prices and lower retail margins (with the expectation of increased turnover). One thing that helped was that the octane rating of its petrol was higher than that sold by the other companies.

Jet initially painted their lorries all-over red, the first example has the stripes shown above but later trucks were plain red. The logo changed to the yellow box with black JET in the later 1950s, the white lettering on the tank says Jet Petroleum Ltd.

Fig ___ Jet lorry in about 1960

Jet lorry livery in 1960s

In June, 1961 Jet became a subsidiary of Continental Oil Company of Delaware (better known as Conoco, and since 2002 as ConocoPhillips), described by Jet as a 'big independent' with 'abundant sources of Libyan crude oil'. It was the intention that Jet should market this oil after it had been processed in German or Italian refineries run by Conoco. In the same year Jet purchased its first petrol station and introduced its first solus agreements. The company continued through difficult times, in the 1980s it expanded a bit then in 2001 it sold all its outlets, although it still supplies them with petrol.

Fig ___ Jet commercial tanker and distributors tanker in 2009

Jet lorry livery in 2009

Images copyright and courtesy of ConocoPhillips

Lobitos Oilfields Ltd
This company was formed in 1908 to operate oil concessions in Peru, South America. Lobitos had its own refinery capacity in the United Kingdom but its main business was as an independent supplier in South America. Its main interest in Britain was the production of specialty products (white oils, transformer and cable oils and bitumen); petrol was produced only as an unavoidable by-product which the company supplied to retailers, commercial customers and ex-tank buyers.

Fig ___ Lobitos tank wagon
Lobitos tank livery

In 1962 they became a subsidiary of Burma Oil Co. but continued selling under their own brand. In 1964 the company's sales of petrol amounted to 12 million gallons. Nearly 80 per cent, of this total was supplied to the retail market, about 70 per cent of it in Northern Ireland where about half of the nearly 300 retailers marketing its petrol had entered into solus arrangements. In England, on the other hand, most of the petrol sold was to retailers without solus arrangements. Lobitos also owned a few petrol stations in the later 1950s and 1960s, branded Lobitos, which they set up because the solus schemes were killing the independent retailer market. The picture below is from a 1967 advert for Thornycroft lorries, the inset shows the Lobitos logo. Their railway did not use the logo (as far as I am aware).

Fig ___ Lobitos branding (used at petrol stations)
Lobitos logo



Berry Wiggins & Co
Established an oil refinery at Kingsnorth on the Hoo peninsular in Kent in 1930, accessed via a single line gated branch from the nearby Southern Railway line which ran as a three line set of long loops before serving numerous sidings in the works. This firm also operated a site at Weaste (near Manchester). This firm operated a large fleet of both Class A and Class B tank wagons, some of the latter being for bitumen and marked "Liquaphalt" in a yellowish roundel. Their Class A tankers had a similar logo design but with Kingsnorth Petroleum inside the roundel.

Fig ___ Berry Wiggins & Co branding for Class B (left) and Class A (right)

Sketch of Berry Wiggins and Co A and B tank markings branding

The Berry Wiggins complex ceased to refine oil in 1977, and refining at the comparatively newer BP Isle of Grain complex (built in 1951) also stopped in 1982. Subsequently, oil was shipped into the country in an already refined state, but deliveries were still made to the Isle of Grain thereafter, the last oil train not departing until 1999.

Butlers Chemicals Ltd. This company started life as a tar distillers (for details of that operation see under Lineside Industries - Coal Tar Distillers). In 1903, William Butler & Co (Bristol) Ltd formed a subsidiary called The British Refined Motor Spirit Co. selling benzole from a distillation plant purchased in the 1890s. Butlers pulled out of the tar distilling business in 1962, by 1965 they had transferred everything to their oil products plant centered on the new Rockingham Works at Avonmouth where they operated under the name of Butlers Chemicals Ltd. In 1972 the name changed again, to Butlers Oil Products, by which time there were Butlers branded petrol stations. The company was taken over by Fina in 1988, and then Total Oil in 2001 and as of 2008 it is still trading as Total-Butler supplying fuel oils. Total Butler holds a royal warrant for fuel oil supplies but as far as I am aware this company distributes only by road haulage from the Avonmouth plant (but I may be wrong on that).

Sinclair Union Petroleum Co
This was an American firm who started trading in the UK about the time of the First World War, I do not believe this firm operated a UK refinery but I understand it did operate a number of Class B tanks carrying lubricants (sold under the Sintex brand) from the 1920s on and I believe in the 1930s they had some Class A tanks carrying paraffin (but marked 'Kerosene'). They were very big in Belgium from the 1920s (and are still there today) and I believe they may have sold their Opaline brand lubricating oils through UK garages in the 1940s. In 1968 they bought out ABCO Ltd, a petroleum oil brokers who, trading as Arthur Brown and Company, had been one of the first importers of Russian oil after World War One. In the 1960s they bought out the small independent Abco and Gainsborough chains of service stations, and so may have operated some petrol tankers at that time, but that operation was in turn bought our by AtlanticRichfield Company (ARCO) in 1969.

Western Refining and Marketing Co
Another American firm, based in Texas I believe, and listed in America as Western Refining. They (or someone using this name) operated a small fleet of Class A tanks in the UK at some point (pre World War Two), the logo from which is shown below, beyond which I have no details.

Fig ___ Western Refining and Marketing Co tank logo

Western Refining and Marketing Co logo

ICI (Imperial Chemical Industries Ltd.)
ICI manufactured petrol from coal on Teeside from 1935, changing to using creosote in 1939, this production continued up to about 1950. I have not yet found details of any tank wagons used for this petrol, the livery would have been similar to the methanol wagon shown above (but presumably with something else written under the red tank band). In the later 1940s ICI began to build a giant integrated chemicals plant at Wilton on Tees (often called the North Tees Works), part of which was an oil-cracking plant for processing petroleum oil. This came on stream in 1950, ICI wanted the naphtha, the petrol was just a by-product it sold off to oil companies. In 1966 ICI went into partnership with Phillips Oil to form Phillips Imperial and further investment in refining was injected, in September 1966 a second distillation unit came on stream which added 4 million tonnes a year to the existing annual capacity of 1 million tonnes from the refinery. The 4 million tonne unit was the first major refinery to be built in the North East of England and the first in Britain constructed specially to use North African crudes. ICI consumed the naphtha and some fuel oil from the refinery, the remaining products, kerosene, diesel, gas oil and fuel oil were sold by Phillips Petroleum Products Ltd (sole agents for PIP) who used rail tanks (as well as road and seabourne tankers and a pipeline). ICI sold its own refinery in 2000 (to Huntsman Corporation) and it's share of the joint Phillips Imperial refinery to Petroplus in 2001.

For rail traffic in the 1960s ICI used hired tank wagons until the early 1970s, after which they operated some tanks themselves, some of which carried their logo. They used a range of wagons for their petrol traffic, the illustration shows a tank (leased from STS) in ICI livery.

Fig ___ Post war ICI Class A tank wagon

sketch of an ICI Class A tank wagon




Post 1960s British Petrol Company Names

During the 1960s, Britain was a booming market and many oil companies set up a UK based distribution system. Most did not last although Total, Conoco and Murco, who all arrived at this time, are still operating their own chains of service stations.

V.I.P.
This was a brand introduced in 1960 by a distributor called Isherwoods Petrol Company. Isherwoods was established in 1934 as a wholesale distributor of petrol and other oil products (their tanker lorries had SUPER in (I think) red on a white rectangle with Petrol to one side) and the company details confined to the cab doors. Isherwoods owned and operated a small chain of petrol stations and a fleet of road tankers and purchased bulk supplies of petrol (both imported and from British refineries) both for its own stations and for sale to other retailers and to commercial consumers. In 1951 a new company was formed to hold and operate the chain of stations leaving Isherwoods to concentrate on wholesale distribution, originally in the Manchester area.
When the solus system was introduced Isherwoods lost most of its retail customers (although sales to commercial users remained). In 1960 the company introduced its V.I.P. brand petrol, pitching the price to compete with the likes of Jet. Towards the end of 1963, following a minor price war amongst the big companies it was able to take over the interests of two smaller wholesale distributors, Octane Petroleum Co. Ltd. and Orbit Petroleum Ltd.. These companies operated in the London area and in Yorkshire respectively, where their brands were sold at prices lower than those of the leading petrol companies. The company acquired ocean terminals and inland storage depots so it could import petrol at a lower price than it could buy it in the UK. In 1964 Signal Oil & Gas Company of California, the main supplier for the firm, bought out Isherwoods but retained the brand and the UK management. In in 1968 the brand was purchased by Occidental Oil (who built an oil refinery at Flotta in the Orkney Islands in 1976).

Fig ___ VIP branded tank wagon

VIP branded tank wagon

Occidental Oil continued using the VIP brand but also introduced their own Oxy petrol brand at some stations. These brands were seen on road tankers and the VIP brand was also seen on rail tanks in the 1970s, but the Oxy brand was not used (as far as I know) on rail tanks.

Fig ___ VIP and Oxy logos

VIP and Oxy petrol station signs

I have not traced any reference to Oxy branded tank wagons in the UK. In the mid 1970s the service stations were sold to Elf. I believe the V.I.P. and Oxy petrol brands had disappeared by the early 1970s.

Amoco
This was an American Oil Company, also known as also known as Standard Oil of Indiana after 1925, who entered the British market in 1964, from when they operated rail tank wagons. Amoco had a large refinery at Milford Haven which came on stream in 1973, the wagon below is both lagged and steam coiled, suggesting it was used for bitumen traffic.

Fig ___ Lagged Amoco tank in the 1970s

Lagged Amoco tank in the 1970s

In 1981 Murco purchased a 30 percent share in the refinery and Amoco sold the rest to Elf in 1990 (I believe Murco are to buy out the Elf stake in 2008). In 1957 all the divisions of Amoco were consolidated into a single company, renamed the Amoco Corporation in 1985. In 1998 Amoco merged with BP to form BP Amoco, now known as BP. The sign below was photographed in the 1980s at an Amoco station.

Fig ___ Amoco

Amoco logo on petrol station sign

Murco
This company was established as a UK company in 1960 (as the British arm of the US oil company Murphy Oil) Murco entered the British market in 1962 by buying two small British chains EP (European Petroleum) and Olympic. Olympic was phased out by about 1970 but some EP branded stations remained. Initially they purchased an oil terminal at Grays in Essex, allowing them to tanker in their own fuel, they hired in 45 ton 4 wheelers for this traffic but these were not branded. This was followed by the development of rail fed terminals at Bedworth, Warwickshire and Theale, Berkshire to supply the expanding Murco and EP service station chains. In 1981 the company took an effective 30% interest in the (then Amoco now Elf) oil refinery in Milford Haven, Wales allowing them to refine their own North Sea Oil supplies. In 1990 the final link in the supply chain was added with the opening of the Westerleigh terminal near Bristol. The sketch below shows the livery on some bogie tankers operating in the 1990s.

Fig ___ Murco rail tanker in the 1990s and detail of logo

Murco tanker with logo

In 1981 Murco expanded its UK operations with the purchase of 30% of Amoco UK’s Milford Haven Refinery. In December 2007 Murco purchased the remaining 70% interest in the refinery to become the 100% owner. Murco owns and operates three storage and distribution terminals within the U.K all of which receive product by rail. The terminals are located in Bedworth, Theale and Westerleigh. The illustration is based on a photograph taken from promotional literature.

Fig ___ Murco road tanker in 2007

Murco road tanker in 2007

Although a small company by comparison to others in the field Murco has managed to survive and thrive by reacting quickly and effectively to the ever changing market conditions. Today Murco supply over 160 company owned and 260 independently owned service stations in addition to a growing number of commercial customers. Being an independent company the benefits of rail transportation outweigh the costs of pipeline building so rail deliveries remain in use in 2007. At some point I believe they merged with Amoco and the petrol stations were branded as Amoco but I am very unsure on this.

Texaco
The Texaco Petroleum Products Company first began marketing fuel and lubricants in the UK in 1916, notably offering the Havolene lubricant brand (originally a 'wax free' petroleum based oil, which they had bought in 1909). It operated a joint distribution system with Standard Oil of California (later Chevron) from the mid 1930s supposedly using the brand name Caltex but in Britain the joint operation used the brand Regent from 1947 (Regent was an existing British independent distributor, see above). They purchased Regent Oil outright in 1956. The illustration below shows a Texaco on 1950s livery, based on the Vanguard Models 1:76 model.

Fig ___ 1950s Texaco tanker

Texaco tanker in 1950s livery

Texaco opened its Milford Haven refinery in 1964 (their only UK refinery) and was one of the last companies to operate the original 35 ton 4 wheel anchor mounted tanks. Caltex was wound up in 1965, at which point the Regent brand was absorbed by Texaco. Texaco merged with Chevron Oil in 2001. The illustration shows the logo used in the 1930s (left) and the post war logo (sometimes used on petrol station signs which changed to the Texaco brand after 1967), the logo on the right is used on petrol stations (after 1967) and on the road and rail tanks.

Fig ___ Texaco logo

Texaco logo

In 2001 Chevron and Texaco merged to form a new company called Chevron Texaco.

Chevron
Originally Standard Oil of California, became a separate company with the break up of Standard Oil in 1911. It operated a joint distribution system with Standard Oil of California (later Chevron) from the mid 1930s supposedly using the brand name Caltex but in Britain the joint operation used the brand Regent from 1947 (Regent was an existing British independent distributor, see above). The Chevron brand first appeared in the UK in 1967 following the end of the Chevron-Texaco joint operation under the Regent banner. In the 1980s the company decided to concentrate its activities in the US, I believe they sold their remaining British interests to Texaco in 1984. In 2001 Chevron and Texaco merged to form a new company called Chevron Texaco.

Fig ___ Chevron logo & 100T Tank

Chevron logo and tanker sketch

Gulf Oil
This was a major global oil company from the 1900s to the 1980s. The eighth-largest American manufacturing company in 1941 and the ninth-largest in 1979. Gulf Oil had operated in the UK since at least the 1920s (in 1929 Silvertown Lubricants on the Thames near London was acquired by the Gulf Oil Corporation, and in 1950 its name was changed to Gulf Oil (Great Britain) Ltd.) As a petrol station brand however Gulf first appeared in Britain in 1962, their first tanks were some second hand fuel oil anchor mounted tanks but were painted blue with orange lettering.

Fig ___ Early Gulf tanks

Early Gulf tanks

The Gulf Oil Refinery at Milford Haven operated from the mid-1960s until 1997, when refining operations ceased and the outlets were sold to Shell. By the mid 1970s they were using their logo in place of the word GULF, this was applied to some 100 ton Class A and Class B tanks, positioned toward the ladder end in both cases.

Fig ___ Gulf 100 ton tanks

Later Gulf tanks

The petrol was branded No-nox and Good-Gulf. The Gulf company was taken over by Chevron in 1984 but the Gulf brand was then sold to the Hinduja family and since 1999 the brand has been licenced to a number of smaller companies in Europe including in the UK (although obviously none of the Gulf-branded petrol now sold in the UK actually comes from a Gulf refinery). The illustration shows what I believe to be the 1960s livery for lorries (this may be in error it was taken from a restored lorry) and the Gluf logo.

Fig ___ Gulf lorry and logo

Gulf logo

Another wholly-owned subsidiary, Continental Oil (U.K.) Ltd., entered the United Kingdom market in 1963. It operates solus arrangements, its petrol being marketed at prices similar to those of the leading suppliers.

Conoco
Continental Oil (UK) Ltd, a wholly-owned subsidiary of Continental Oil Corp of the USA Conoco was taken over by Marland Oil Co who ran the UK based Dominion distribution company in the 1930s, the Marland triangle logo was retained but the Conoco name was used as it was an established brand. Conoco began operating branded stations in the UK in the 1960s after discovering an oil field in Libya, and built the Humber Refinery, South Killingholme (opened in 1969). In 1961 they bought the Jet chain but retained the brand, which had a loyal following. By the later 1960s Conoco was operating both 4-wheel 45 ton tanks and also 100 ton bogie tanks (the latter operated as block trains of 18 wagons). In 2002 Conoco merged with Phillips Petroleum. The triangular logo was in use in the 1950s, replaced by the oval type upper right at some point, then by the joint ConocoPhillips logo.

Fig ___ Conoco logos

Conoco logos

In the 1970s Conoco leased some 20 foot wheelbase 50 ton four wheelers from Procor, these were slightly unusual in design but as a challenge you could fabricate something rather similar by cutting down a pair of Peco tank wagons, although this does leave you with two short ends. There is a drawing and several photographs in Mr Tourret's book on Petroleum Railtanks (see bibliography), the sketch below shows the livery in the later 1970s.

Fig ___ Conoco leased 50 ton tanker

Conoco logos

Phillips Petroleum
This company started operations in the UK in the 1960s, combining with ICI as Philips Imperial Petroleum but also operated a number of Class A and Class B 45 and 100 ton rail tankers it its own '66 livery' from 1966. It worked with ICI (who had an existing refinery they used to make naphtha) and built a joint refinery on Teeside. In 2002 Phillips Petroleum merged with Conoco.

Fig ___ Phillips tankers and detail of logo

Phillips tankers

Agip
Azienda Generale Italiana Petroli was established in 1926 is an Italian automotive gasoline and diesel retailer. It was a subsidiary of multinational petroleum company Eni. Agip entered the British market in 1963 but I was not able to find a reference to a UK refinery. In 1966 the British operation was bought out by Esso.

Tenneco
This was an American conglomerate that started life as the Tennessee Gas Company and diversified into a range of industries, including the oil business. They entered the UK retail petrol market by buying the existing Globe and Golden outlets but I believe they sold the chain of outlets to Jet in the early 1980s. I do not believe they had a refinery in the UK and I have not traced any references to tank wagons in their livery. In 1971 they bought into the chemicals giant Albright and Wilson, and by 1978 they owned the whole company. Albright and Wilson which retained its identity and management until 1995 when it was sold off as a part of the break-up of Tenneco (see also 'Lineside Industries - Chemicals, salt and plastics industries' for more on Albright & Wilson).

Nafta
This was a company from the Soviet Union who arrived in the mid 1960s. They sold their chain to Q8 in 1987. I believe they imported their products from Russian refineries.

Fig ___ NAFTA logo

NAFTA logo

Atlantic Petroleum
This company arrived in the UK in the 1960s, became part of ARCO in 1968, sold its British network to Total by 1970. I believe this was just a distributor with no UK refineries.

Fig ___ Atlantic logo

Atlantic logo

Elf
This is a French company, purchased Occidental's British VIP and OXY chains in 1974 and about that time merged with another big French firm but the Elf brand remained. Purchased Amoco and Heron chains in the UK in the later 1970s (I believe). Purchased a 70 percent share in the Milford Haven Refinery from Amoco in 1990. Merged with Total in 2000 (new firm called TotalFinaElf, but that was never a brand). Elf name was gone by about 2003 but the new company retained a 70 percent interest in the Milford Haven Refinery, this is (I believe) to be sold to Murco in 2008). Elf have definitely operated rail tanks in the UK, including 45 ton four wheelers and 100 ton bogie types, as I understand it the 100 ton tanks were leased and had the Elf logo toward the ladder end of the tank on both sides.

Fig ___ Elf logo

Elf logo

Paul Bartlett's fotopic site has several pictures of leased BRT wagons, see Appendix Seven - Photo Sites for a link to Paul's pages.

Ultramar A British oil exploration company who, in the mid 1960s began selling petrol, they ended up with a small chain of stations branded Ultramar, these changed to Arco in about 1970. I do not believe either of these names appeared on rail tankers although they may have used branded road tank lorries.

Repsol YPF, S.A. Repsol (Refinería Española de Petróleo, Sociedad Limitada or Spain Petroleum Refinery) is a newcomer, incorporated in 1986. Repsol is an integrated oil and gas company engaged in all aspects of the petroleum business, they have refineries in four countries and distribution and marketing activities in 12 countries. They have five refineries in Spain and four refineries in Latin America (Argentina and Peru) and interests in another three jointly operated refineries.